🚚 Free shipping over $35  ·  ↩️ 45-day no-question returns  ·  🏠 100% renter-friendly
🛒

Motion Sensor Night Light — Battery Powered, No Wiring

Rated 4.8 out of 5 based on 5 customer ratings
(5 customer reviews)

$6.99

Battery-powered motion night light — no outlet needed. Peel-and-stick installs on any surface in 60 seconds. PIR sensor auto-turns on 10 warm LEDs when you walk by. 3× AAA batteries included.

📦 In stock — ships within 24 hours
·
🚚 Free shipping over $20
SSL Secure Checkout
45-Day Returns
Renter-Friendly
Tracked Shipping
SKU: PIC-NL-001 Category:
Add $28.00 more for FREE shipping

Light Up Any Dark Corner — No Outlet Required

Motion-activated LED light. Battery powered. Peel-and-stick.

Most night lights need a wall outlet. This one works anywhere — stick it inside a dark closet, under the kitchen cabinet, along a hallway baseboard, or at the top of the stairs. The built-in PIR motion sensor detects your approach from up to 10 feet (120°) and lights your path automatically. No wiring, no drilling, no landlord approval needed.

Motion sensor night light — battery powered, no wiring needed

Why Renters Love It

Designed for apartments. No tools, no permanent changes, no deposit risk.

🛠️ No Installation, No Holes

Adhesive mount or stand on any flat surface. Peel, stick, done. Zero modification to your rental.

🔋 Battery Powered (AAA)

No cord, no outlet needed, no drilling. Runs on 3× AAA batteries (included). Works anywhere.

🌙 Auto On/Off

Only activates when you’re near and it’s dark — built-in photocell means it ignores daylight. Zero maintenance.

💡 Warm, Gentle Glow

0.8W soft warm white (~3000K) LEDs won’t disturb sleep or hurt eyes. Enough light to see, not enough to wake you.

📏 Ultra-Slim Design

180 × 30 × 16 mm — barely 7 inches long. Discreet enough for any room, bright enough for any hallway.

🏠 Deposit-Safe

No drilling, no wiring, no paint damage. Peel-and-stick mount removes cleanly. 100% refund-ready.

Perfect Spots — See It in Action

One small light, five everyday places in a real apartment.

Inside closet — light turns on when you open the door

✨ Inside closet

Hallway — no more fumbling for switches at night

✨ Hallway

Under cabinets — lights your counter without blinding you

✨ Under cabinets

Staircase — see each step, avoid a fall

✨ Staircase

Bathroom — dim enough to keep your night vision

✨ Bathroom

Night light magnetic mount installation — peel and stick

Install in 1 Minute — Zero Tools

Peel. Stick. Snap. Done.

  1. Peel. Clean surface, remove 3M adhesive liner from the steel plate.
  2. Stick. Press plate to any clean, dry surface — wood, tile, glass, or painted drywall.
  3. Attach. Light bar snaps on magnetically. Removes easily for battery changes.
  4. Go. 4× AAA batteries included — works in closets, cabinets, hallways, stairs, bathrooms.

Technical Specifications

Motion Sensor Night Light — Battery Powered, No Wiring

Dimensions180 × 30 × 16 mm (7 × 1.2 × 0.6 in)
Weight~95 g (with batteries)
Light Source10 warm white LEDs, 0.8 W total
Color Temperature~3000 K (warm white, non-glare)
SensorPIR motion (120° detection, 10 ft / 3 m range) + photocell (daylight off)
Power3 × AAA alkaline batteries (included)
Battery Life~6 months (10 activations/day, 30s each)
MaterialAluminum alloy body + matte PC/ABS end caps
MountingMagnetic — adhesive steel plate included (3M foam tape)
LED Lifespan50,000 hours
CertificationFCC / CE / RoHS
No Wiring
Battery Powered
Motion Activated
Peel & Stick
Renter Friendly
Deposit Safe
FCC Certified

What’s in the Box

1 × Night light bar · 1 × Magnetic steel plate with 3M adhesive · 4 × AAA batteries · 1 × User manual

Note: This is a passive infrared sensor light — no WiFi, no app. It simply works when you walk by. No setup, no pairing, no batteries to change for months.

5 reviews for Motion Sensor Night Light — Battery Powered, No Wiring

  1. Rated 5 out of 5

    Nina P. –

    Absolute must-have for renters! I put one in my closet, one under the sink, and one in the laundry area. All stick-mounted with zero damage to the walls. Moving out? Just pop them off. The magnetic attachment makes battery changes super easy too. Already recommended to three friends.

  2. Rated 4 out of 5

    Ethan C. –

    Works as advertised. I have it at the top of my basement stairs and it turns on every time I walk by. Installation was easy – magnetic mount is clever. Only giving 4 stars because the adhesive could be stronger. After a month it started sliding slightly. Used my own 3M tape and it’s been fine since.

  3. Rated 5 out of 5

    Laura W. –

    Bought this for my kitchen cabinets and love it. Opens automatically when I walk in at night – no more fumbling for switches. The light is warm and soft, not blinding like some LED strips. My landlord even approved because there’s no wiring. Going to buy another for the bathroom.

  4. Rated 5 out of 5

    Mike D. –

    Perfect for my dark hallway! I live in an old apartment with zero hallway lighting and this thing is a lifesaver. The motion sensor picks me up from about 8 feet away and lights up instantly. Super easy to install – just peeled the sticker and stuck it on the wall. Battery life seems great so far.

  5. Rated 5 out of 5

    Tom R. –

    Put one in my hallway and one in the bathroom. The motion detection is instant — lights up before I even finish stepping into the room. The light is warm and soft, not harsh like my old plug-in night light. Battery has been going for 2 months on the first set. Great for late-night trips.

Add a review

Your email address will not be published. Required fields are marked *

Zero Damage
No drilling, no wiring, no landlord approval needed
1-Min Setup
Peel the adhesive, stick it on, done. No app, no WiFi, no outlet needed
Auto On/Off
Motion-activated in the dark, off in daylight. Fully automatic
Portable
100% portable. Moving? Pack it up, no trace left
Scroll to Top
Motion Sensor Night Light — Battery Powered, No Wiring
$6.99